Developing fatigue test machine for composite material
This paper’s goal is to introduce the third step of the EFOP-3.6.1-16-2016-00014. project on the Faculty of Engineering, University of Szeged. In this period the production technology of composite material was chosen and a fatigue test machine was developed and tested. The paper shortly describes th...
Elmentve itt :
| Szerzők: | |
|---|---|
| Dokumentumtípus: | Cikk |
| Megjelent: |
University of Szeged, Faculty of Engineering
Szeged
2022
|
| Sorozat: | Analecta technica Szegedinensia
16 No. 1 |
| Kulcsszavak: | Gépészet, Kompozit |
| Tárgyszavak: | |
| doi: | 10.14232/analecta.2022.1.83-89 |
| Online Access: | http://acta.bibl.u-szeged.hu/77875 |
| LEADER | 01803nab a2200289 i 4500 | ||
|---|---|---|---|
| 001 | acta77875 | ||
| 005 | 20230713103958.0 | ||
| 008 | 221214s2022 hu o 0|| eng d | ||
| 022 | |a 2064-7964 | ||
| 024 | 7 | |a 10.14232/analecta.2022.1.83-89 |2 doi | |
| 040 | |a SZTE Egyetemi Kiadványok Repozitórium |b hun | ||
| 041 | |a eng | ||
| 100 | 1 | |a Szuchy Péter | |
| 245 | 1 | 0 | |a Developing fatigue test machine for composite material |h [elektronikus dokumentum] / |c Szuchy Péter |
| 260 | |a University of Szeged, Faculty of Engineering |b Szeged |c 2022 | ||
| 300 | |a 83-89 | ||
| 490 | 0 | |a Analecta technica Szegedinensia |v 16 No. 1 | |
| 520 | 3 | |a This paper’s goal is to introduce the third step of the EFOP-3.6.1-16-2016-00014. project on the Faculty of Engineering, University of Szeged. In this period the production technology of composite material was chosen and a fatigue test machine was developed and tested. The paper shortly describes the composite materials and summarizes the theory of fatigue than it presents the process of the development with several prototypes of fatigue test machine, some of which were manufactured and tested. Initially a shaker played the key role in the first two conceptions and finally a crank mechanism became as the best solution. The main solved problems during the development were selection of bearings and solving the partly dynamic balancing of the moving parts. | |
| 650 | 4 | |a Műszaki és technológiai tudományok | |
| 650 | 4 | |a Gépészmérnöki tudományok | |
| 695 | |a Gépészet, Kompozit | ||
| 700 | 0 | 1 | |a Molnár Tamás |e aut |
| 700 | 0 | 1 | |a Bíró István |e aut |
| 700 | 0 | 1 | |a Csikós Sándor |e aut |
| 700 | 0 | 1 | |a Gogolák László |e aut |
| 700 | 0 | 1 | |a Sárosi József |e aut |
| 856 | 4 | 0 | |u http://acta.bibl.u-szeged.hu/77875/1/engineering_2022_001_083-089.pdf |z Dokumentum-elérés |